Evergreen Base Oils are re-refined
hydro-treated neutral oils whose typical properties are comparable
to virgin base oils.
|
Features
- Re-refined from consistent supply of paraffinic used engine
oils.
- Hydrogen treatment over catalyst at severe pressure and
temperature, gives good stability, light color, low sulphur, high
VI and saturates that meet Group II specifications.
- In 2004, Evergreen Group II base oils were engine-tested by
Infineum. The Matrix Core program, for API CI-4/SL/CF performance
level, was conducted in SAE 15W-40 and 10W-30 viscosity grades, and
for API SL/CF/CF-2 in the SAE 30 viscosity grade in appropriate
Group I and Group II base stocks. A Base Oil Interchange Program
was then conducted in Evergreen Group II base stocks in SAE 15W-40,
and 10W-30 viscosity grades for API CI-4/SL/CF performance level
and SAE 30 viscosity grade, for API SL/CF/CF-2 performance
level.
- For all the tests covered by the Codes of Practice of the
American Chemistry Council (ACC) and/or the Additive Technical
Committee (ATC), the ACC/ATC tests protocols were observed.
- Infineum D3422 is the baseline additive package. In the Matrix
Core program, its performance is demonstrated at 14.1 mass % for
SAE 15W-40, 10W-30, SAE 30, and all other viscosity grades.
- Evergreen re-refined base lubricating oils also passed the
laboratory and engine testing required for PCMO ILSAC/API GF IV.
Documentation is available upon request.
|
|
|
Test
|
Units
|
110
Minimum
|
110
Maximum
|
110
Typical
|
250
Minimum
|
250
Maximum
|
250
Typical
|
|
Viscosity
ASTM D 445
|
cST @ 100 C
cST @ 40 C
SUS@100 F
|
4.1
|
4.5
|
4.3
22
112
|
7
|
7.4
|
7.2
49
250
|
|
Viscosity Index
ASTM D 2270
|
|
|
|
102
|
|
|
107
|
|
Density
ASTM D 1298
|
g/cc @ 60 F
lbs/gal @ 60 F
|
|
|
0.865
7.4
|
|
|
0.871
7.4
|
|
API Gravity
ASTM D 287
|
API @ 60 F
|
|
|
33.9
|
|
|
33
|
|
Color
ASTM D 1500
|
|
|
1
|
<0.5
|
|
1.5
|
<1.0
|
|
Flash Point, COC
ASTM D 92
|
F
|
360
|
|
390
|
450
|
|
470
|
|
Pour Point
ASTM D 97
|
F
|
|
|
-15
|
|
|
-12
|
|
Total Acid Number
|
mg KOH/gm
|
|
|
<0.01
|
|
|
<0.01
|
|
Total Sulphur
ASTM D 3120
|
wt %
|
|
|
0.02
|
|
|
0.02
|
|
% Saturates
ASTM D 2007
|
wt %
|
|
|
90.5
|
|
|
92
|
|
Total Ash Content
ASTM D 482
|
wt %
|
|
|
<0.001
|
|
|
<0.001
|
|
Crackle Test - Trace Water
Chevron Test Method 350
|
|
|
|
PASS
|
|
|
PASS
|
|
Odor
|
|
|
|
None
|
|
|
None
|
|
Appearance
|
|
|
|
Bright &
Clear
|
|
|
Bright &
Clear
|
|
|
Evergreen neutrals are premium
quality, hydro-finished, paraffin base, neutrals oils refined to
meet Group II Standards. Typical properties may fluctuate within
modest ranges dependent upon operating conditions.
|
