R&D Fountain Industries Aqueous Parts Washers 55714 AL80AQ, 80-Gallon Capacity Agitating These Aqueous Parts Washers are usually a heated parts washer/degreaser for general purpose cleaning. Instead of using harsh petroleum solvents, these machines usually utilize water-based cleaners. Our line of parts washers will handle a wide array of cleaning requirements. From light automotive to heavy-duty industrial applications, we have a parts washer to fit your needs. We also carry a full array of styles to handle any budget or cleaning need. All cleaning times will vary depending upon the soils being removed and the cleaner being used. Please feel free to contact us with any questions or requirements for special applications. Features: 12-Gauge steel construction with powder epoxy paint. Dual stainless steel spring-loaded door closures. Thermostat is preset to deliver optimal cleaning temperature of 110°F. Includes Backup safety thermostat that shuts down the heater if primary thermostat fails. 6000-Watt heater. 80-gallon fluid capacity. Flow-through brush with polyester filaments for the toughest water-based cleaning applications. Heavy-duty 250-lb. Load capacity. Operates on only 8 CFM of air at 120 PSIG. Preset 120 PSIG air regulator with air filter and auto drain. V-notched heavy-duty nylon rollers for smooth trouble-free operation. Agitation shelf lifts to the top for easy loading and unloading. Agitation speeds from 0 to 160 agitations per minute. 208-240VAC/60HZ/1PH/26A. Electrical plug not included. Stainless steel and 480VAC/3PH version available upon request. Consult the factory. Specifications 55714 AL80AQ Overall height Overall width Overall length Inside tank depth Inside tank width Inside tank length Platform length Platform width Amps Shipping weight 66" 34" 52-1/2" 27-3/4" 26-1/2" 44-1/2" 42" 17" 26A 570 lbs. Back to Parts Washer Page or for more information, please Contact Us