Evergreen Base Oils are re-refined hydro-treated neutral oils whose typical properties are comparable to virgin base oils.
Features
- Re-refined from consistent supply of paraffinic used engine oils.
- Hydrogen treatment over catalyst at severe pressure and temperature, gives good stability, light color, low sulphur, high VI and saturates that meet Group II specifications.
- In 2004 Evergreen Group II base oils were engine tested by Infineum. The Matrix Core program, for API CI-4/SL/CF performance level was conducted in SAE 15W-40 and 10W-30 viscosity grades, and for API SL/CF/CF-2 in the SAE 30 viscosity grade in appropriate Group I and Group II base stocks. A Base Oil Interchange Program was then conducted in Evergreen Group II base stocks in SAE 15W-40, and 10W-30 viscosity grades for API CI-4/SL/CF performance level and SAE 30 viscosity grade, for API SL/CF/CF-2 performance level.
- For all the tests covered by the Codes of Practice of the American Chemistry Council (ACC) and/or the Additive Technical Committee (ATC), the ACC/ATC tests protocols were observed.
- Infineum D3422 is the baseline additive package. In the Matrix Core program, its performance is demonstrated at 14.1 mass % for SAE 15W-40, 10W-30, SAE 30, and all other viscosity grades.
- Evergreen re-refined base lubricating oils also passed the laboratory and engine testing required for PCMO ILSAC/API GF IV. Documentation is available by request.
|
Test |
Units |
110
Minimum |
110
Maximum |
110
Typical |
250
Minimum |
250
Maximum |
250
Typical |
Viscosity
ASTM D 445 |
cST @ 100 C
cST @ 40 C
SUS@100 F |
4.1 |
4.5 |
4.3
22
112 |
7 |
7.4 |
7.2
49
250 |
Viscosity Index
ASTM D 2270 |
|
|
|
102 |
|
|
107 |
Density
ASTM D 1298 |
g/cc @ 60 F
lbs/gal @ 60 F |
|
|
0.865
7.4 |
|
|
0.871
7.4 |
API Gravity
ASTM D 287 |
API @ 60 F |
|
|
33.9 |
|
|
33 |
Color
ASTM D 1500 |
|
|
1 |
<0.5 |
|
1.5 |
<1.0 |
Flash Point, COC
ASTM D 92 |
F |
360 |
|
390 |
450 |
|
470 |
Pour Point
ASTM D 97 |
F |
|
|
-15 |
|
|
-12 |
Total Acid Number |
mg KOH/gm |
|
|
<0.01 |
|
|
<0.01 |
Total Sulphur
ASTM D 3120 |
wt % |
|
|
0.02 |
|
|
0.02 |
% Saturates
ASTM D 2007 |
wt % |
|
|
90.5 |
|
|
92 |
Total Ash Content
ASTM D 482 |
wt % |
|
|
<0.001 |
|
|
<0.001 |
Crackle Test - Trace Water
Chevron Test Method 350 |
|
|
|
PASS |
|
|
PASS |
Odor |
|
|
|
None |
|
|
None |
Appearance |
|
|
|
Bright &
Clear |
|
|
Bright &
Clear |
|
Evergreen neutrals are premium quality, hydro-finished, paraffin base, neutrals oils refined to meet Group II Standards. Typical properties may fluctuate within modest ranges dependent upon operating conditions.
Click here to view the MSDS for 110 neutral base oil
Click here to view the MSDS for 250 neutral base oil |
|
